! to the table of contents
< to the previous section:
> to the next section:
It really makes removing SIMMs easy. It looks like a dental tool: about six inches long with a 1/2" long head offset at 90 degrees. To remove SIMMs, you slip the head into the hole on one side of the SIMM, rest the head on the SIMM socket next to the SIMM you are pulling, and pivot the tool back, using the simple fulcrum to gently pry the SIMM up about 1/8" from the socket on that side. Repeat on the other side, and the SIMM can be then removed by hand.