=== eComStation 2.0 RC2 README === !!! WHEN TESTING BETA SOFTWARE, ALWAYS BE SURE TO HAVE A TRIED AND TESTED BACK OF YOUR SYSTEM !!! Thank you for your interest in testing the latest version of eComStation 2.0. A great deal of effort has been made to improve the usefulness to the product. Please see the 'WHATSNEW.TXT' document for an overview of all changes. This product is available for download to all registered users of Software Subscription Services for eComStation. For more information, please visit: http://www.ecomstation.com/subscription/ This release offers a number of improvements that we would like to have tested on a larger number of configurations. These are: ** Netware installation from CD1 ** It is now possible to add Netware client support to eComStation, straight from the installation CD. This is especially important for those customers that have a Netware networking environment. ** Preboot harddisk integrity check ** There are several situations which may cause installation problems with LVM in the install process. In this release, it is possible to disable the integrity check at page 2 (miscellaneous) of the eComStation installer preboot menu. - PBR problems: Set when either the 'hidden sectors' or the geometry fields in a bootsector do not match the position of the partition or the used disk-geometry. - CHS problems: Set when the CHS-values in a partition-table for a partition do NOT match the current disk-geometry used by the operating system. This may lead to error from (mini)LVM about the disk being 'corrupt'. Another possible cause for this error is that if there are any partitions present on a disk that have NO LVM information at all, and are of a type that gets a default driveletter assigned in that case (by OS2LVM.DMD/OS2DASD.CMD) - Boot problems: Set when extended-containers are marked ACTIVE, when multiple primaries are marked ACTIVE, or if any non-standard flagbyte values are used in the partitiontable. These errors MAY lead to the system failing to boot properly! These will now be detected before the installer starts and an option to fix them is being presented. If you choose not to fix them, you are not able to proceed the installation. This technology uses a custom DFSee 'engine' and should be safe, however, neither Serenity Systems International nor Fsys can be held liable for any damages that may occur to the data on your harddrive. ** Harddisk volume resizing ** This version has a custom DFSee engine that enables reliable RESIZING of FAT32 and NTFS filesystems to allow shrinking an existing Windows installation to make room for eComStation on the same system. While this functionality has been available in DFSee (and the OEM Engine) for quite a while, it was NOT considered reliable enough to offer to end users during eComStation install. Starting with DFSee release 7.12, and the OEM Engine based on that, the reliability of resizing has improved to the point where it can be used without hesitation for this purpose. A Windows NTFS filesystem resized by DFSee will pass a subsequent Windows CHKDSK with NO ERRORS now. The engine included in RC2 is at level 8.08. The GUI to this tool has been updated and is now using a graphical interface. To invoke it, please select 'Paritition Resizing Tool' from the Installation Volume Manager which can be called during installation (choose 'New Volume' to start MiniLVM). It will take a while to complete loading, when done, please select Next to show the list of resizable volumes. If the list is empty, this means there is no suitable volume detected that has enough free space for it to be resized. ** Bootable JFS ** This release of eComStation contains the option to install the operating system on a JFS volume. The advantage of doing this is that the amount of diskcache is only limited by system memory (typically 10% of available memory is assigned) This increased cache size gives a huge gain in overall system performance. To install onto a Bootable JFS volume, you will have to select 'JFS' as filesystem type in the 'Format Volume' page of the installer. A number of analysis tools are available on the install CD: in \ECS\BOOTJFS cachejfs.exe - query and set parameters of cache cstats.exe - query usage of cache jfschk32.exe - chkdsk launcher during boot (can be used instead of chkdsk) in \ECS\BOOTJFS\DEBUG chklgjfs.exe - show results of last chkdsk dumpfs.exe - dump internal structure of JFS logdump.exe - dump current state of log to \JFSLOG.DMP validfs.exe - show current state of JFS xchkdmp.exe - show results from chkdsk.new xchklog.exe - dump results of last chkdsk to \chkdsk.new xpeek.exe - utility for interactive work with structure of JFS ** Genmac ** This package provides generic driver support for several network interface cards under OS/2 and eComStation. Moreover, Genmac is enabled to support WPA encryption with the Wireless LAN Monitor 3.x or better. Genmac and the Wireless LAN monitor will be installed when the appropriate hardware is detected by the installer. If it is not detected, you can manually select the driver in the network installation dialog. Note: only the selected driver will be copied onto your system, in order to prevent problems with the MPTS installer later on. This may seem confusing, when you run MPTS in a later stage, it will not show all Genmac supported NICs. A full list of supported NIC chipsets can be found in 'WHATSNEW.TXT'. Support has been added to autodetect over 300 NICs that are using one of these chipsets. ** ACPI & APM ** Support for ACPI is available in this release. The current version is 2.22. ACPI will be automatically enabled if appropriate hardware is detected. You can manually enable or disable ACPI support at page 2 (miscellaneous) of the eComStation installer preboot menu. Even if not installed, the corresponding documents are installed on your harddrive. You can find detailed information and testdocuments in \ECS\DOC\ACPI and \ECS\DOC\APM Several tests can be performed, please refer to \ECS\DOC\ACPI\TESTER.DOC and \ECS\DOC\APM\TESTER.DOC When ACPI is installed, there is a number of utilities from the ACPI Toolkit you can use, see the list below: AcpiTree.exe - Show ACPI tree ButtonJin.exe - Wait press Power Button (as demon), GUI WaitButton.exe - Wait press Power/Sleep button, VIO PowerOff.exe - Power Off (immediate!!) SetGetThrtl.exe - Get/Set throtlling CPU UpTime.exe - Show uptime via PM Timer GetValue.exe - Get current value from PM Timer AcpiIRQ.exe - Show current IRQ routing IrqStat.exe - Show IRQ calling statistics (SMP only) SetGetState.exe - Get/Set frequency/power state EmbeddedEvent.exe - Show events from Embedded controllers GetNotify.exe - Show notify Thermal.exe - Show temperature of thermal zone ScanPCI.exe - Show PCI devices TmrTest.exe - Test working of timer (testing IRQ0 timer 0) ** multicore CPU support ** This release supports the installation of eComStation on a MultiCore CPU computer. This includes Intel Core Duo , Core2 Duo and AMD 64 X2. To enable it, you can do so in the ACPI Wizard that is launched from the Post Installation tasks at the end of the installation. Alternatively you can start the ACPI Wizard at any time from the install/remove folder in the Local System folder on the desktop. The ACPI Wizard will try to determine your system configuration and set parameters accordingly. You can manually change them of course. Please note: many drivers are not SMP capable, which may cause instability or unexpected behaviour on your system. For more information please refer to \ECS\DOC\ACPI\ACPI_SMP.DOC ** SMP support ** It is also possible to install eComStation 2.0 RC2 on a regular SMP machine. You will have to activate it with the ACPI Wizard from the Post Installation Tasks wizard that is started at the end of the installation. This should enable you to properly finish installation, before activating the SMP feature. ** eComStation Virtual File System (Samba client support) ** Samba is a SMB/CIFS protocols file and print sharing server/client set originally made for UNIX world to cooperate with corresponding Windows and OS/2 servers or clients. eComStation has a native implementation of SMB/CIFS server/client set - IBM LAN Manager and IBM Peer. These products have not been recently updated and may have some compatibility issues with modern Windows SMB/CIFS implementations. Serenity Systems International has reached an agreement with Blueprint Software Works for the inclusion of the 'eComStation Virtual File System' driver which provides support for Samba Client. Currently a GUI to configure it is lacking, but an example of how to mount a Samba resource can be found in \ECS\DOC\EVFS\REXX == REPORTING == To tell us your findings, please create a report at: http://www.ecomstation.com/support/rc2report/ You are also welcome to join the TestTeam if you want to discuss this beta and future developments. See http://ewiki.ecomstation.nl/TestTeam for more details. == DISTRIBUTION / CREATING CDS == This product is provided as a downloadable ISO file, this is a raw CD image that you can burn on CD-R media. For instructions on burning the CD image to CD please consult the PDF document howtoburncds.pdf in the same directory. The file to download is: ecs20rc2_cd1_en.zip == REGISTRATION KEY REQUIRED FOR INSTALLING == For the time being you can use the eComStation 1.2 (or 1.2R) key to install this beta release of eComStation 2.0. (c) 2001-2007 Serenity Systems International [eof]